Know your board
Identify the exact board, camera module, power requirements, and programming interface.
Checkpoint: You can identify the matching camera configuration.
All learning paths 01 02 03 04 05
Beginner to intermediate / 4–6 weeks suggested pace
IoT & ESP32
Connect code to the physical world.
Your path from learning to making
Set up the toolchain
Install the official ESP32 Arduino support and open Espressif's CameraWebServer example.
Checkpoint: The example compiles for your selected board.
Capture your first image
Follow the board's documented flashing procedure and inspect the serial output.
Checkpoint: Camera initialization succeeds and you can view a still image.
Connect on your local network
Configure Wi-Fi locally, open the device's reported address, and try the stream.
Checkpoint: Another device on the same network can open the camera page.
Document a working prototype
Record setup steps, board details, image settings, and recovery steps after a reset.
Checkpoint: You can reproduce the build and explain its limits.
Looking for lessons to support your build?
Browse existing courses and articles. Check each resource for prerequisites and its creator.